Explore selected research articles based on editorial recommendation, readership engagement, and scholarly impact.
Most Viewed
Article
Korelasi Kesetimbangan Fasa Sistem Co2-c2h5oh Pada Kondisi Subkritik
Denny Riama SilabanEdy Tri BaskoroSaladin Uttunggadewa
This paper concerns with the correlation of phase equilibrium of binary system of carbon dioxide-ethanol at subcritical and supercritical condition. In this study, three equations of state(Redlich-Kwong, Soave-Redlich-Kwong, and Peng-Robins……
Denny Riama SilabanEdy Tri BaskoroSaladin Uttunggadewa
This paper concerns with the correlation of phase equilibrium of binary system of carbon dioxide-ethanol at subcritical and supercritical condition. In this study, three equations of state(Redlich-Kwong, Soave-Redlich-Kwong, and Peng-Robinson) together with conventional mixing rule, were applied for correlating phase equilibrium the system. The capabilities of these equations of state were examined with experiment results obtained from the literatures. The results show that Soave-Redlich-Kwong and Peng-Robinsoh equations of states can well correlate the phase equilibrium of binary system of…
Denny Riama SilabanEdy Tri BaskoroSaladin Uttunggadewa
In recent years, ï¬ber-matrix composite laminates have been widely used in mechanical structures. Due to functional design requirements, the laminates may contain holes that could cause stress concentration. Unlike isotropic plate, where the stress concentration depend upon geometric parameter and loading conditions, stress concentration factor of ï¬ber-matrix composite is also depend on the anisotropic properties such as ï¬ber direction and angle ply. This paper present intensive studies of the influence of the ï¬ber direction and angle ply to the stress concentration factors for…
Denny Riama SilabanEdy Tri BaskoroSaladin UttunggadewaDjoko Suprijanto
To overcome the difficulties in calibrating a hot wire anemometer the equation E2 = A+BU0.45, as the reference equation in making hot wire anemometer, was changed to U = (1/ B (E2-A))2.22 to produce linear calibration curve. To realize this idea then an electronic circuit was designed with IC AD 534 and AD 538 as the main components. IThe hot-wire anemometer was made based upon the above principles then used to measure velocity components of swirling flow, which has two components of velocity, i.e.: axial (normal) velocity and tangential velocity. In measurement of swirling flow the probe-X…